MODEL:HDC-50 Single Output Switching Power Supply |
Features:
Universal AC input/ full range
Protection: Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
1 year warranty
Dimensions: 129*98*38mm(L*W*H ) |
casing No. : H002
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setup,Rise Time,
Hold Time
|
500ms¡¢30ms/230VAC 1200ms¡¢30ms/115VAC
50ms/230VAC, 10ms/115VAC
|
|
|
AC 85¡«264VAC DC 120¡«370VDC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
110%¡«150% Protection: Hiccup mode£¬recovers automatically after fault condition is removed
|
|
CH1£º5.75-6.75 Protection type: Shut down o/p voltage, re-power on to recover
|
|
|
-20¡æ¡«+60¡æ£»20%¡«90 %RH no cooling (Refer to output load derating curve)
|
|
-40¡æ¡«+85¡æ£»10%¡«95 %RH
|
|
10¡«500Hz£¬2G 10min./1cycle, period for 60min, each along X, Y, Z axes
|
|
|
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC
|
|
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
|
|
|
Design refer to UL60950-1,CB£¨IEC60950-1£©
|
|
Design refer to EN55022 CLASSB EN61000-3-2,-3 EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-1
|
|
|
|
|
|
|
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì & 47¦Ì parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.Each output can reach to maxium current, but the total load can not exceed rated power.
5.The power supply is considered as a component inside the equipment, the final equipment must be confirmed it meets EMC directives. |